Masterclock products
Masterclock products
24/7 Support & sale
5 year warranty
29 years experience
Count Down:
Other products:
RC1000 - Dual-Channel Production Timer
RC1000 - Dual-Channel Production Timer
The RC1000 is a dual-channel up/down production timer for count and control applications. Supporting both network and time code, this versatile and functional device is essentially two counters in one. Counts are entered via a numeric keypad and a new count can be started during a current count or after it has stopped. It can be programmed with 20 count presets, or counts can be calculated and entered during production. The six-digit dual displays can show HH:MM:SS or MM:SS:FF. Each channel generates SMPTE/EBU to sync production equipment or to control counts on our TCDS Series digital clocks (or any clock that accepts raw SMPTE/EBU). Each channel can also generate network count packets to control our NTDS Series digital clocks.
Standard Features
- 2 independent timing channels
- 6-digit dual displays can show HH:MM:SS or MM:SS:FF
- Generates SMPTE/EBU (30/25/24fps ndf, 29.7df) & network count packets
- Locks to SMPTE/EBU, IRIG-B, NTP or internal reference
- Add or subtract time for quick calculations
- 20 programmable presets with 6 count sequence chaining
- 2 GPI inputs & 2 GPI outputs (opto-isolated TTL)
- Redundant DC & PoE power
Other Features
- Fully configurable offsets for time zone and DST
- WinDiscovery configuration and monitoring software included
- Configure device manually, or via network using WinDiscovery or Telnet/SSH, or through direct connection using USB
- Supports NTP, DHCPv4, DHCPv6 for automatic network acquisition
- IPv4, IPv4/IPv6 supported
- SNMP with custom MIB
- LED brightness control
Connectors
- DB25 – time code I/O, RS232, GPI I/O (DB-25 terminal block adapter included)
- RJ45 10/100MB - configuration, network communications and PoE power
- USB - configuration
- DC input 2.1 mm male jack - power
Physical
- Size: 5.2x8x1.75 in (13.2x20.3x4.4 cm)
- Weight: 1.8 lb (0.82 kg)
- Temperature: 0 to 60 C
- Humidity: Up to 90% (non-condensing)
- Black powder coated steel chassis
- Rubber non-slip feet for tabletop use
Operating Parameters
- Temperature: 0 to 60°C
- Humidity: Up to 90% (non-condensing)
Power
- PoE (48VDC, IEEE 802.3af)
- DC input 9-28VDC (24VDC wall-mount power supply with locking DC plug included)
Warranty
- 5-year limited parts and labor warranty
Compliance
- FCC, CE Marked, ROHS, ANSI